Catalyst Products Description
The CAS number of BDMAEE is 3033-62-3, and the chemical name is N,N,N',N' -tetramethyl-2,2 '-oxybis (ethylamine), which is a colorless to yellowish liquid tertiary amine and one of the most active amine foams currently available. It mainly promotes the urea (water-isocyanate) reaction in soft and hard polyurethane foam, has extremely high catalytic activity and selectivity for foaming reaction, and has high pure product activity, which is suitable for the production of almost all foam products, mainly for the production of soft foam products, especially for the production of high rebound and RIM products.
BRAND NAME: MXC-A1
CROSS REFERENCE GUIDE:BL-11
PRODUCT NAME: BIS(2-DIMETHYLAMINOETHYL) ETHER(A-1)
CAS NO.: 3033-62-3
Purity:70%±1%
Water: ≤0.3%
Appearance: Clear, Colorless Liquid
DPG Content: 30%±1%
Flash Point: 74℃
Specific Gravity at 25℃: 0.90
Water Solubility: Soluble
Application
A-1 is the established blowing catalyst for all types of flexible foam. Its strong catalyticeffect on the blowing reaction can be balanced by the addition of a strong gelling catalyst.When used in flexible slabstock formulations, A-1 catalyst improves the processing of allgrades of foam ranging from low to high density, and from filled to high resiliency grades.The unique performance characteristics of A-1 catalyst make it an effective choice for highresiliency molded foam. In this application, a catalyst system containing both A-1 and astrong gelling catalyst will effectively meet most standard processing requirements.
Package:
170kgs net steel drum, 850kgs net IBC drum.
HAZARDS IDENTIFICATION
GHS Classification
Classification according to Regulation (EC) No 1272/2008 as amended:
Hazardous to the aquatic environment - Chronic Hazard; Category 3
Skin corrosion/irritation; Category 1B
Acute toxicity; Category 4; Oral
Acute toxicity; Category 4; Dermal
Acute toxicity; Category 4; Inhalation
GHS-Labelling Regulation (EC) No. 1272/2008:
Regulation No. 1272/2008.
Signal word : danger
Hazard statements
H332 Harmful if inhaled.
H312 Harmful in contact with skin.
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
Precautionary Statement - Prevention:
P280 Wear protective gloves/protective clothing/eye protection/face protection.
Precautionary Statement - Response:
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contactlenses, if present and easy to do. Continue rinsing.
P313 Get medical advice/attention.
P308+P313 IF exposed or concerned: Get medical advice/attention.
Precautionary Statement - Disposal:
P501 Dispose of contents/container to an approved incineration
Labelling according to EC Directives
1999/45/EC
Hazardous components which must be listed on the label:
Bis(2-dimethylaminoethyl)ether
Symbol(s) : C Corrosive
R-phrase(s) : R34 Causes burns.R20/21/22 Harmful by inhalation, in contact with skin and if swallowed.R52/53 Harmful to aquatic organisms, may cause longterm adverse effects in the aquaticenvironment.
S-S-phrase(s) : S26 In case of contact with eyes, rinse immediately with plenty of water and seekmedical advice.S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.S45 In case of accident or if you feel unwell, seek medical advice immediately (show thelabel where possible).S60 This material and its container must be disposed of as hazardous waste.
Hot Tags: MXC-BDMAEE, China MXC-BDMAEE manufacturers, suppliers, factory, Polycat 77, Bdma Catalyst, Pmdeta Catalyst, teda amine, Dabco T, Dabco 1027
